NTC Sensor Thermistor -
NTC Sensor Thermistor - Data
|
Written by MLHT Type
|
Monday, 02 June 2008 21:10 |
NTC Sensor Thermistor - MLHT Type NTC Sensor Thermistor MLHT Type | | | | | | | | | | | | | | | | | | FEATURES: | | | | | | | | Low cost, high stability. | | | | | | | The UHT series thermistors is a high-performance thermal sensing device. | | | Excellent thermal cycle endurance and they small B-value tolerance and resistance. | | | | | They insure temperature precision of ±0.3℃ and can be employed for very accurate temperature control or compensation. | | No adjust between the control circuit and the sensor. | | | | | | They are also useful for insert to PCB in the constant length. | | | | | | | | | | | | | | | | | | | | | | | | | | | | | SPECIFICATIONS | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Temperature rating | -40℃ to 125℃ | B value : | 3250K ~ 4750K | | | | | Determined by rated zero-power | | R25 | | | Resistance at 25℃ and 85℃ | | | | | | | | | | | | | | | | | | | | | | | | | | R25 Rated zero-power Resistance value at 25℃ | 2 K ohms | Tolerance: | ±1% | ±3% | ±5 % | | 5 K ohm J 3970 | | | 10 K ohm J 3435 | Dissipation constant: | 2mW/℃ | | 15 K ohms | | | 20 K ohms | Thermal time constant: | Typically 15 seconds in air. | | 50 K ohms | | | 100 K ohm J 4390 | Maximum power Rating: | 10-15 mw at 25℃ | | | | | | | | | | | | | | | | | | | | | | | | | | Order Map | MLHT | 103 | J | -□□□□ | | | | | (1) | (2) | (3) | (4) | (5) | | | | | Series Code | Type | Value | Tolerance | B value | | | | | SINLOON | Thermistor | at 25℃ | F=1% | 25℃/85℃ | | | | | | 10x1000Ω | H=3% | | | | | | | J=5% | | | | | | | | | | | | | | | | |
|
Last Updated ( Sunday, 26 October 2008 20:52 )
|