Cement Resistor -
Cement Resistor - Series
|
Written by AH Type
|
Monday, 09 June 2008 12:27 |
ALUMINUM HOUSED. WIREWOUND RESISTORS ALUMINUM HOUSED. WIREWOUND RESISTORS | | | | | | | | | | | | | | | | | | | PRECISION POWR RESISTORS | | | | | | | | Aluminum Housed (Chassis Mount) | | | | | | | | | | | | | | | | | FEATURE: | | | | | | | | | | High power rating, small size and ultra precision. | | | | | | | Standard winding & non-inductive winding types. | | | | | | | | | High stability, strong construction. | | | | | | | | | | | | | | | | | | | | | | GENERAL SPEC: | | | | | | Materials: | | | | | Wattage Range: | | | | | | Encapsulant: Silicone | | | | 6 styles to choose ranging from 5 to 250 watts. | | | | End caps: Stainless steel | | | | Resistance Tolerance: | | | | | | Core: Ceramic steatite or alumina | | | ±10%, ±5%, ±3%, ±2%, ±1%, ±0.5% | | | | | Housing: | | | | | Operating Temperature Range: -55% to +275 | | | | Aluminum with hard anodic coating | | | Dielectric Strength: | | | | | | Element: | | | | | AH-5 AH-10 AH-25 1000V AH-50 1500V AH-100 AH-250 2500V | | | Copper-nickel alloy, nickel-chrome alloy or manganese copper | Temperature Coefficient of Resistance:Standard T.C.: | | | | Standard Terminals: | | | | ±30PPM/oC =10 and up, ±50PPM/oC =1 to 9.99 | | | | 5~50W Tinned terminals 100~250W Threaded terminals | | ±90PPM/oC =below 1 | | | | | | | | | | | | | | | | | | | | | | | STANDARD ELECTRICAL SPEC. | | | | | | | | | | | | | | | | | | | | | | Type | MIL | Wattage | Resistance Range (Ω) | MAX Working (V) | (g) | proper heat sink | | | Style | Rating | MAX | (aluminum chassis) | | | AH | AHN | AH | AHN | Weight | | | | Inductive | Non-inductive | | | AH- 5 | RE60 | 5 | 0.05 ~ 3k | 0.1~1k | 120 | 70 | 3 | 152X102X51X1t | | | AH- 10 | RE65 | 10 | 0.02 ~ 6k | 0.03~2.3k | 245 | 180 | 7 | 152X102X51X1t | | | AH- 25 | RE70 | 25 | 0.012~15k | 0.02~5.5k | 500 | 300 | 15 | 178X127X51X1t | | | AH- 50 | RE75 | 50 | 0.01 ~40k | 0.02~12k | 1300 | 600 | 33 | 305X305X1.5t | | | AH-100 | RE77 | 100 | 0.4 ~50k | 0.12~25k | 1900 | 1340 | 450 | 305X305X3t | | | AH-250 | RE80 | 250 | 0.6 ~80k | 0.15~40k | 2500 | 1750 | 800 | 305X305X3t | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | PERFORMANCE: | | | | | | | | | | | | | | | | | | | | | | | Parameters | Test Conditions | Specifications | | Short Time | 5X wattage rating-5sec. | △R± (0.5%+0.05Ω) MAX | | Over Load | | Moisture | Temp 40oC moisture 95% DC 100v500Hr | △R± (0.5%+0.05Ω) MAX | | Resistance | | Moisture | Temp 40oC moisture 95% 1/10 X wattage rating (1.5Hr ON-0.5Hr OFF) - Repeat 1000Hr | △R± (0.5%+0.0Ω5) MAX | | LoadLife | | Load Life | Load Rating ( chass is mounted) (1.5Hr ON-0.5Hr OFF) Repeat 1000Hr | △R±(1.5%+0.05Ω) MAX | | Vibration | 10c/s~50c/s~10c/s (1min)-2Hr each of paralleled and right angle | △R ±(0.2%+0.05Ω) MAX | | Heat | 275oC 2Hr | △R± (0.5%+0.05Ω) MAX | | Resistance | | Dielectric | AH- 5 AH- 10 AH- 25 1000V | △R± (0.2%+0.05Ω) MAX | | Strength | AH-50 1500V | | | AH-100 AH-250 2500V | | Insulation | Under the same test condition of Dielectric Strength, Load DC500V and measure the Insulation R. | 1000MΩ min | | Resistance | | Terminal | 1. Pull Test (30 sec Min) AH-5 1kg, AH-10 2.3kg, AH-25, AH-50 4.5kg | △R± (0.2%+0.05Ω) MAX | | Strength | 2. Torque Test (5~15sec) AH-100 27kg-cm, AH-250 36kg-cm | |
Page-2
|
Last Updated ( Wednesday, 27 May 2009 22:53 )
|