50G High Ohm Chip Resistor

Written by 50G MQHR Series

Tuesday, 26 May 2009 13:39

High Value Surface Mounted Resistor - MQHR Series
High Value Surface Mounted Resistor - MQHR Series
FEATURE:
Custom designs / sizes available.
Resistance range to 50G ohms.
Termination avaliable for wire bonding or soldering.
Low voltage coefficient of resistance.
DIMENSION
ELECTRICAL DATA:
Power Rating:
The high resistance value of these devices is such that power dissipation is always small.
The rating is therefore determined by voltage considertions only. As shown in the table below.

Style	*Resistance Range (Ω)	Rated Vol.	Temp. ℃	TCR PPM/℃	Tolerance
0503	10M to 500M	50V (max)	-55 to +155	0 to 2500 ppm	±10%.
	501M to 20G				±25%, ±50%.
0805	100M ~ 1G	100V(max)	-55 to +155	0 to 2000 ppm	±5%, ±10%.
	1.1G ~ 50G				±25%, ±50%.
1005	100M ~ 1G	150V(max)	-55 to +155	0 to 1500 ppm	±5%, ±10%.
	1.1G ~ 50G				±25%, ±50%.
1206	100M ~ 1G	200V(max)	-55 to +155	0 to 1000 ppm	±5%, ±10%.
	1.1G ~ 50G				±25%, ±50%.
Notes:	Measured at 10 volts.
*Higher values available, consult factory for details.

Last Updated ( Tuesday, 26 May 2009 16:35 )